I purchased a 3bbl brite tank from brew-stuff.com. It did not come with fittings or any paperwork/manual.
This will be my first time using a brite and I have some questions regarding fittings/general process.
There are two TC fittings on one side, that I believe are for a sight glass.
A TC on the bottom that I believe is for transfer/filling kegs.
TC on the lower-right when facing that I believe to be for the carb stone.
I threaded fitting below the manway, is that for a thermometer?
On the top are 3 1.5" TC fittings, and one larger one. I assume one 1.5" TC is for a safety valve and one to use CO2 to push the beer, not sure on the third.
Can I please get some help as to what all those are for, as well as some best-practice tips for using the brite?
See pics:
Thanks
Mike
This will be my first time using a brite and I have some questions regarding fittings/general process.
There are two TC fittings on one side, that I believe are for a sight glass.
A TC on the bottom that I believe is for transfer/filling kegs.
TC on the lower-right when facing that I believe to be for the carb stone.
I threaded fitting below the manway, is that for a thermometer?
On the top are 3 1.5" TC fittings, and one larger one. I assume one 1.5" TC is for a safety valve and one to use CO2 to push the beer, not sure on the third.
Can I please get some help as to what all those are for, as well as some best-practice tips for using the brite?
See pics:
Thanks
Mike
Comment