Hi all,
Hoping someone has encountered this problem before. Recently started brewing on an old PUB Systems 7 bbl system. Its the complete brewpub package they used to offer (copper combi brew house, 4 Uni's). The fermenters are proving to be my biggest nemesis. First problem is that they appear to only have a 45 degree cone so harvesting and settling are not so great. The other problem is that the tanks have no racking arms in the racking port. I found plenty of racking arms online and purchased this one
Problem solved, right? Nope.
The racking port on the tank is unnecessarily long, not allowing the sharp bend of the pipe to make it through. The last place I worked had DME tanks with nice, gradual, continuous curved racking arms. I would love something like this, and figured I'd see if anyone knew of any short of contacting DME directly.
Thanks in advance!
Hoping someone has encountered this problem before. Recently started brewing on an old PUB Systems 7 bbl system. Its the complete brewpub package they used to offer (copper combi brew house, 4 Uni's). The fermenters are proving to be my biggest nemesis. First problem is that they appear to only have a 45 degree cone so harvesting and settling are not so great. The other problem is that the tanks have no racking arms in the racking port. I found plenty of racking arms online and purchased this one
Problem solved, right? Nope.
The racking port on the tank is unnecessarily long, not allowing the sharp bend of the pipe to make it through. The last place I worked had DME tanks with nice, gradual, continuous curved racking arms. I would love something like this, and figured I'd see if anyone knew of any short of contacting DME directly.
Thanks in advance!
Comment