Tweet
Draft Technician Needed
Modern Draught is looking to bring Boston into a new era of better quality in draft beer.
If you have been looking for an opportunity to break into the beer industry behind the scenes and are technically inclined, this could be the position you were looking for.
Much like cars, we've run beer systems past their prime until they are prone to breaking down. Draft beer systems need routine maintenance to perform as intended, but the issues go deeper than that. Beer is organic and alive. Imagine the funk and mold that grows in untended beer systems. This is effecting the quality and flavor of our beer…
Be a part of fixing these issues as the beer industry grows at a rapid pace.
Qualifications for the position:
- 1-2 years experience working with beer and a basic understanding (pouring, brewing, selling, styles)
- Tapped and un-tapped a bunch of kegs
- Technical aptitude preferred
- Must be able to lift kegs (160 lbs)
- Must have valid drivers license and working vehicle (you will be compensated for your mileage)
- Comfortable working around chemicals and inside coolers
- Okay working overnight if necessary/unconventional working hours
- Part time to start; full time potential
This is an entry-level position as a Draft Technician. Compensation is at an hourly rate and will be discussed further upon inquiry. Also, you will have the opportunity to earn more for off-hour or emergency maintenance calls.
info@moderndraught.com
(857) 278-2005
:
Modern Draught is looking to bring Boston into a new era of better quality in draft beer.
If you have been looking for an opportunity to break into the beer industry behind the scenes and are technically inclined, this could be the position you were looking for.
Much like cars, we've run beer systems past their prime until they are prone to breaking down. Draft beer systems need routine maintenance to perform as intended, but the issues go deeper than that. Beer is organic and alive. Imagine the funk and mold that grows in untended beer systems. This is effecting the quality and flavor of our beer…
Be a part of fixing these issues as the beer industry grows at a rapid pace.
Qualifications for the position:
- 1-2 years experience working with beer and a basic understanding (pouring, brewing, selling, styles)
- Tapped and un-tapped a bunch of kegs
- Technical aptitude preferred
- Must be able to lift kegs (160 lbs)
- Must have valid drivers license and working vehicle (you will be compensated for your mileage)
- Comfortable working around chemicals and inside coolers
- Okay working overnight if necessary/unconventional working hours
- Part time to start; full time potential
This is an entry-level position as a Draft Technician. Compensation is at an hourly rate and will be discussed further upon inquiry. Also, you will have the opportunity to earn more for off-hour or emergency maintenance calls.
info@moderndraught.com
(857) 278-2005
: