Results 1 to 3 of 3

Thread: Adjusting Mash pH

  1. #1
    Join Date
    Nov 2016
    Location
    New Jersey
    Posts
    9

    Adjusting Mash pH

    Was working with some local malts from a farm (just simple 2-row pale) in a recent brew of a pale ale. The water chemistry spreadsheet I use calculated for a different type of pale malt, so my acidification for the mash was a bit off and I ended up with a higher mash pH than I am used to. I guess I am wondering what the outcome of the beer will be with the higher (5.5) mash pH and how I can go about adjusting the mash pH during the mashing process. I usually will let the wort recirculate for roughly 10-15 mins and then cool the wort before testing my pH. All help is greatly appreciated. Thanks!

  2. #2
    Join Date
    Dec 2016
    Location
    Southwest, VA, USA
    Posts
    36
    I'd have to double check, but last I read an ideal mash pH for amylaze activity is 5.3-5.5, whereas 5.0-5.2 is ideal for post boil wort pH and yeast activity. You should be fine.

  3. #3
    Join Date
    Nov 2016
    Location
    United Kingdom
    Posts
    103
    How did this work out? I would imagine fine or only slightly lower extract. However, that was my hypothesis, what did the testing show?

Similar Threads

  1. Efficiency - Adjusting Hop Additions
    By Alphaacid in forum Recipe Formulation (Available for Sponsorship )
    Replies: 11
    Last Post: 09-12-2015, 01:23 PM
  2. Adjusting gravity with extract, new equipment fail
    By MadHatter in forum General R&B Discussions (Available for sponsorship)
    Replies: 6
    Last Post: 05-05-2015, 08:57 AM
  3. Adjusting pH for Sparge with Tankless Waterheater?
    By honkey in forum Equipment Q&A (Sponsored by Sungood Machinery)
    Replies: 2
    Last Post: 10-02-2013, 07:13 PM
  4. Adjusting pressure release valve
    By KTY in forum Equipment Q&A (Sponsored by Sungood Machinery)
    Replies: 2
    Last Post: 01-14-2013, 07:39 AM
  5. Help in adjusting Brewing Water
    By rmarquis in forum Process and Techniques (Sponsored by CPE Systems)
    Replies: 2
    Last Post: 03-07-2012, 08:42 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •