Announcement

Collapse
No announcement yet.

sensors

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • sensors

    hello all!

    i am wondering where can i find sensors like the ones in the picture the thread size is 1/2"

    thanks cheerS
    Attached Files

  • #2
    While ours are longer, yours look just like our Watlow RTD sensors.

    Peter Landman | Brewmaster | Seabright Brewery | Santa Cruz, CA

    Comment


    • #3
      Are you looking for the actual sensor, or the sensor housing, or both as pictured? They don't always come together.

      I agree it looks like an RTD. Possibly PT100. They are usually quite long, but can be cut to size.

      I would suggest Grainger, McMaster Carr, Omega, Automation Direct, Pyromation, depending on what you have available in the DR. Watlow (as suggested) is a good choice too. You should be able to get a number of fittings for the housing to match your 1/2" npt, and a watertight cord fitting to ensure a good seal. I prefer a spring loaded fitting for the 1/2" NPT to Thermowell so the sensor touches the end of the well at all times. Thermal paste is also helpful in general.

      Comment

      Working...
      X