anybody have a o2 assy they're pleased with that isnt the $400 gwkent unit?
we have the sabco HX with 3/4 TCs and therefore run out to the FV via 1/2 hoses. currently i've had a sightglass+tee set up with the o2 stone coming in from the side, attached to bottom port of the FV. but i feel that the sightglass/tee being much larger diameter at 1.5" is giving us less dissolved o2 than we should have. and also realized i should have it connected back off the HX so it has some time to absorb inside the hose before it hits the FV.
so ideally i'ld like to find something like a 3/4 TC sized tee that will fit an o2 stone, if that even exists. probly doesnt. so maybe a 1" tee with a 1" sightglass? then back into 1/2 hose to create some backpressure and hopefully dissolve better on the way to FV.
maybe even a 1" manifold tee for o2 stone and the thermometer to keep it all in one package more or less.
if anybody has examples or suggestions please chime in.
thanks
we have the sabco HX with 3/4 TCs and therefore run out to the FV via 1/2 hoses. currently i've had a sightglass+tee set up with the o2 stone coming in from the side, attached to bottom port of the FV. but i feel that the sightglass/tee being much larger diameter at 1.5" is giving us less dissolved o2 than we should have. and also realized i should have it connected back off the HX so it has some time to absorb inside the hose before it hits the FV.
so ideally i'ld like to find something like a 3/4 TC sized tee that will fit an o2 stone, if that even exists. probly doesnt. so maybe a 1" tee with a 1" sightglass? then back into 1/2 hose to create some backpressure and hopefully dissolve better on the way to FV.
maybe even a 1" manifold tee for o2 stone and the thermometer to keep it all in one package more or less.
if anybody has examples or suggestions please chime in.
thanks
Comment