In the quest to build an experimental brewhouse using a novel approach to brewing I am on the search for a heavy duty pump. The pump will be passing mash through it at a high flow and pressure. To reach maximum efficiency I am looking for a pump that can reach 8 bar and 350 GPM. This has been a tall order to find such a powerful, sanitary pump. Accepting a less capable pump at a better price point is becoming appealing. To still achieve the intended effect the pump must operate at least 4 bar and 200 GPM. Are any of you familiar with any such brands or options that would fit the higher end or acceptable specs?
Specs requested:
-Food safe, high viscous circulation capable
-High pressure capable, 8 bar/125PSI
-High flow rate, 350+ GPM capable
-Pump and motor under 40k!
Thanks for reading.
Edit to add:
I don't know if it's bad etiquette to post distributors prices. I have received pricing for Ampco's CB+ line between the 6-10k range for the 218 & 328 with impeller and motors. Writing to add this is the best pricing I have seen for a capable pump.
Specs requested:
-Food safe, high viscous circulation capable
-High pressure capable, 8 bar/125PSI
-High flow rate, 350+ GPM capable
-Pump and motor under 40k!
Thanks for reading.
Edit to add:
I don't know if it's bad etiquette to post distributors prices. I have received pricing for Ampco's CB+ line between the 6-10k range for the 218 & 328 with impeller and motors. Writing to add this is the best pricing I have seen for a capable pump.
Comment