Page 1 of 6 123 ... LastLast
Results 1 to 15 of 82

Thread: Produce 35 Cans Per Minute - CraftCan35 - American Beer Equipment

  1. #1
    Join Date
    Oct 2013
    Location
    Lincoln, NE.
    Posts
    1,072

    Lightbulb Produce 35 Cans Per Minute - CraftCan35 - American Beer Equipment

    Name:  12.28.2017  CraftCan35_2.jpg
Views: 578
Size:  100.7 KB
    Name:  12.28.2017 features Template.jpg
Views: 558
Size:  71.6 KB
    Name:  12.28.2017 contact us Template.png
Views: 560
Size:  64.4 KB


    At American Beer Equipment, we’re always looking for ways to make things better, stronger and faster! With ABE’s new CraftCan35 you’ll find your initial investment to be much more manageable, while at the same time, churning out as many as many of other, more expensive systems. Don't pay for extra features like "Weighing Your Cans", with our filling system techonology, you automatically eliminate the "weighing of cans" task.

    Designed off the same ingenious platform as the very successful CraftCan15, the 35 is able to produce up to 35 cans per minute based on beer type and operator efficiency.

    With a footprint of just under 96” x 24”, this compact design has been specifically engineered with low entry cost in mind. The CraftCan35 incorporates all the robust features of its slower paced predecessor while ramping up production to a consistent and manageable rate.


    CraftCan3035 – NOW WITH PATENT PENDING SERVO-SEAMER TECHNOLOGY!
    Abe’s Patent Pending Servo-Seamer Technology is an unmatched breakthrough in its class.

    No other can seamer is able to claim the benefits and advantages of this revolutionary design.


    What makes ABE’s Servo-Seamer such a valuable tool for your operation?


    – Patent-pending Torque Monitor instantly inspects and assesses seam accuracy on every can.

    – Seams not meeting a pre-determined, measured specification are rejected, ensuring maximum quality and shelf stability.

    – Greatly reduces product loss and shelf spoilage versus manual inspection.

    – Minimizes the need for tedious, manual, tool adjustments as many modifications are made on the touchscreen.

    – Utilizing a state-of-the-art, 24-bit Encoder with Servo Positional Accuracy means, repeatable, precision seams within 0.15 degrees.

    – The custom engineered algorithm allows for precise seam analysis, never seen before in this class of equipment.

    – Because of continuous data logging, maintenance can be done on a predictive, not a reactive basis.

    – System diagnostics available for remote troubleshooting.

    – Small footprint. 8′ length x 2′ width.

    – Production rates of up to 35 CPM. (Speed depends on beer type and operator efficiency)

    – Up to 87 cases per hour (12 oz. cans).

    – Exclusive 1-piece fill head design for enhanced sanitary environment and increased fill level accuracy.

    – Proprietary CO2 Micro-burst action to better manage foam-on-beer.


    Can Filler / Lid Application

    – 5 Head / 3-Port CO2 Purge Cycle – precision purge control means reduced dissolved oxygen pick-up resulting in reliable oxygen evacuation.

    – 5 Head / 3-Port In-Line Automatic Filler.

    – Lift-and-Fill superior filling nozzle technology.

    – Quick change Lid Magazine.

    – CO2 pressurized lid chute with integrated anti-jamming automation.

    – Lid Pick-in-Motion action – improves accuracy and minimizes dissolved oxygen pick-up.

    – Proprietary CO2 Gas Tunnel – prevents external oxygen from entering the can before the lid is applied.

    – Lid Detection / Rejection system.


    Servo Seamer Technology

    – Automated Servo Seamer with Wash-down, IP67 rated Servo Motor.

    – Components oversized for repeatable, rugged operation. Cylinder bore size exceeds manufacturer’s recommendation. Internal cylinder uses large bushings for extended life. MIC6 Aluminum Mounting Plates for accurate Seamer alignment.

    – “Gentle-Tap”- Lid Tamp Cylinder lightly presses lid-on-can prior to seam action to ensure balanced lid placement to increase seaming accuracy.

    – Precise Pin Height Adjustment to ensure proper positioning between Lower Lift Cylinder and the Seam Tooling – easy access for quick and reliable adjustment. Seamer arms are fully accessible and easy to align.

    – Protective Seamer Enclosure – Lexan enclosure protect operators from mechanical motion while allowing visual inspection of the operation.

    – Heavy Duty Cylinders – Lift cylinders and Linear Drive Cylinders that engage tooling engineered for accurate and reliable seam quality.

    – Internal seals are replaceable to minimize maintenance cost.

    – Tooling – High-quality American-Made. Titanium coated engineered steel. Rated for up to 25 million cycles.

    – Automated can reject and real-time seam analysis system.

    – Superior PLC controls with an oversized touchscreen display.

    – iPad and iPhone access for remote monitoring, diagnostics, and control.

    – Random, manual seam inspection is recommended to check seam alignment.

    – Transparent enclosures around filler, seamer, rinser.

    – Works with a wide variety of can sizes including: 8oz. sleek, 10oz. sleek, 12oz. sleek, 12 oz., 16oz. standard, 24oz. (requires specific modification). 300ml. sleek, 330ml. sleek, 355ml. sleek, 330ml., 350ml., 375ml., 470ml., 500ml., 530ml., 568ml.standard and 250ml., slim Conveyor System

    – Solid 304 stainless steel construction

    – Main conveyor system with wash down the motor.

    – Complete stainless steel drip tray with the central drain.

    – Durable 304 Stainless Steel, UHMW, and anodized aluminum construction.

    – Operator friendly conveyor height.

    – Optional rinse and dry station available.

    – Optional wheels to allow CraftCan3035 to be used as a mobile canning system available for additional cost.

    – Like all ABE equipment, we provide our customers with a comprehensive Operators Manuals, Preventative Maintenance Schedules and detailed Electrical Schematics for a complete understanding of the Theory of- Operation to ensure long-term success.



    Cheers!
    The A.B.E. Team
    402-475-BEER (2337)
    info@americanbeerequipment.com
    Last edited by American Beer; 02-16-2018 at 11:16 AM.

  2. #2
    Join Date
    Oct 2013
    Location
    Lincoln, NE.
    Posts
    1,072

    Lightbulb See what brewers all over the world have to say about ABE


  3. #3
    Join Date
    Oct 2013
    Location
    Lincoln, NE.
    Posts
    1,072

    CraftCan35 – NOW WITH PATENT PENDING SERVO-SEAMER TECHNOLOGY!

    CraftCan35 with a footprint of just under 96” x 24”, this compact design has been specifically engineered with low entry cost in mind. The CraftCan35 incorporates all the robust features of its slower paced predecessor while ramping up production to a consistent and manageable rate.

    Can Filler / Lid Application
    – 5 Head / 3-Port CO2 Purge Cycle – precision purge control means reduced dissolved oxygen pick-up resulting in reliable oxygen evacuation.

    – 5 Head / 3-Port In-Line Automatic Filler.

    – Lift-and-Fill superior filling nozzle technology.

    – Quick change Lid Magazine.

    – CO2 pressurized lid chute with integrated anti-jamming automation.

    – Lid Pick-in-Motion action – improves accuracy and minimizes dissolved oxygen pick-up.

    – Proprietary CO2 Gas Tunnel – prevents external oxygen from entering the can before the lid is applied.

    – Lid Detection / Rejection system.
    Attached Images Attached Images  
    Last edited by American Beer; 01-18-2018 at 02:54 PM.

  4. #4
    Join Date
    Oct 2013
    Location
    Lincoln, NE.
    Posts
    1,072

    CraftCan35 - Can Filler / Lid Application

    – 5 Head / 3-Port CO2 Purge Cycle – precision purge control means reduced dissolved oxygen pick-up resulting in reliable oxygen evacuation.

    – 5 Head / 3-Port In-Line Automatic Filler.

    – Lift-and-Fill superior filling nozzle technology.

    – Quick change Lid Magazine.

    – CO2 pressurized lid chute with integrated anti-jamming automation.

    – Lid Pick-in-Motion action – improves accuracy and minimizes dissolved oxygen pick-up.

    – Proprietary CO2 Gas Tunnel – prevents external oxygen from entering the can before the lid is applied.

    – Lid Detection / Rejection system.
    Last edited by American Beer; 02-04-2018 at 11:37 AM.

  5. #5
    Join Date
    Oct 2013
    Location
    Lincoln, NE.
    Posts
    1,072

    Servo Seamer Technology for your Canning Line

    Servo Seamer Technology

    – Automated Servo Seamer with Wash-down, IP67 rated Servo Motor.

    – Components oversized for repeatable, rugged operation. Cylinder bore size exceeds manufacturer’s recommendation. Internal cylinder uses large bushings for extended life. MIC6 Aluminum Mounting Plates for accurate Seamer alignment.

    – “Gentle-Tap”- Lid Tamp Cylinder lightly presses lid-on-can prior to seam action to ensure balanced lid placement to increase seaming accuracy.

    – Precise Pin Height Adjustment to ensure proper positioning between Lower Lift Cylinder and the Seam Tooling – easy access for quick and reliable adjustment. Seamer arms are fully accessible and easy to align.

    – Protective Seamer Enclosure – Lexan enclosure protect operators from mechanical motion while allowing visual inspection of the operation.

    – Heavy Duty Cylinders – Lift cylinders and Linear Drive Cylinders that engage tooling engineered for accurate and reliable seam quality.

    – Internal seals are replaceable to minimize maintenance cost.

    – Tooling – High-quality American-Made. Titanium coated engineered steel. Rated for up to 25 million cycles.

    – Automated can reject and real-time seam analysis system.

    – Superior PLC controls with an oversized touchscreen display.

    – iPad and iPhone access for remote monitoring, diagnostics, and control.

    – Random, manual seam inspection is recommended to check seam alignment.

    – Transparent enclosures around filler, seamer, rinser.

    – Works with a wide variety of can sizes including: 8oz. sleek, 10oz. sleek, 12oz. sleek, 12 oz., 16oz. standard, 24oz. (requires specific modification). 300ml. sleek, 330ml. sleek, 355ml. sleek, 330ml., 350ml., 375ml., 470ml., 500ml., 530ml., 568ml.standard and 250ml., slim Conveyor System

    – Solid 304 stainless steel construction

    – Main conveyor system with wash down the motor.

    – Complete stainless steel drip tray with the central drain.

    – Durable 304 Stainless Steel, UHMW, and anodized aluminum construction.

    – Operator friendly conveyor height.

    – Optional rinse and dry station available.

    – Optional wheels to allow CraftCan3035 to be used as a mobile canning system available for additional cost.

    – Like all ABE equipment, we provide our customers with a comprehensive Operators Manuals, Preventative Maintenance Schedules and detailed Electrical Schematics for a complete understanding of the Theory of- Operation to ensure long-term success.

    Contact us today to learn more and receive a personalized quote!
    Website: www.americanbeerequipment.com
    Email: info@americanbeerequipment.com
    Phone: (402) 475-BEER

    Name:  seamer.jpg
Views: 811
Size:  79.1 KB

  6. #6
    Join Date
    Oct 2013
    Location
    Lincoln, NE.
    Posts
    1,072

    Craft Beer Association Convention - CraftCan35

    We hope to see you at the Craft Beer Association convention in Nashville this year! If you are attending, make sure to mark your calendar to check out booth #424. We'd love to meet you!

    Learn more: www.americanbeerequipment.com
    Email: info@americanbeerequipment.com
    Phone: (402)475-BEER

    Name:  2018 CBC -Booth Advertisement.jpg
Views: 783
Size:  100.7 KB

  7. #7
    Join Date
    Oct 2013
    Location
    Lincoln, NE.
    Posts
    1,072

    Schedule a tour at ABE

    Our staff at American Beer Equipment would love to meet you! Schedule a tour today to learn more about our CraftCans or get a chance to see your CraftCan in production.

    Learn more: www.americanbeerequipment.com
    Email: info@americanbeerequipment.com
    Phone: (402)475-BEER
    Schedule a Tour: http://americanbeerequipment.com/plant-tour/

    Name:  3C2A4AC9-4EBF-4A27-B4EB-2E6EF4C199BB.jpg
Views: 771
Size:  106.7 KB

  8. #8
    Join Date
    Oct 2013
    Location
    Lincoln, NE.
    Posts
    1,072

  9. #9
    Join Date
    Oct 2013
    Location
    Lincoln, NE.
    Posts
    1,072

    Servo Seamer Technology for your Canning Line


  10. #10
    Join Date
    Oct 2013
    Location
    Lincoln, NE.
    Posts
    1,072

    Other Products Available!

    Is your brewery in need of a canning line as well?

    If you have questions regarding our other products or services, please contact us and we'd be happy to put together a quote for you.
    American Beer Equipment
    http://americanbeerequipment.com/
    (402) 475-BEER

    Customer Reviews for Canning Line

  11. #11
    Join Date
    Oct 2013
    Location
    Lincoln, NE.
    Posts
    1,072

    Interesting in a Keg Washer as well?

    Is your brewery in need of a keg washer? Check out the best in the market Keg Commander that actually cleans your entire keg.

    Learn more: www.americanbeerequipment.com
    Email: info@americanbeerequipment.com
    Phone: (402)475-BEER

    Request a Quote: http://americanbeerequipment.com/request-a-quote/

    Keg Commander


  12. #12
    Join Date
    Oct 2013
    Location
    Lincoln, NE.
    Posts
    1,072

  13. #13
    Join Date
    Oct 2013
    Location
    Lincoln, NE.
    Posts
    1,072

    Why American Beer Equipment?

    See what customers are saying about ABE!

    Learn more: www.americanbeerequipment.com
    Email: info@americanbeerequipment.com
    Phone: (402)475-BEER
    Follow us on Facebook: https://www.facebook.com/americanbeerequip/

    Request a Quote: http://americanbeerequipment.com/request-a-quote/


  14. #14
    Join Date
    Oct 2013
    Location
    Lincoln, NE.
    Posts
    1,072

    Does your brewery want to start canning?!

    Learn more: www.americanbeerequipment.com
    Email: info@americanbeerequipment.com
    Phone: (402)475-BEER
    Follow us on Facebook: https://www.facebook.com/americanbeerequip/

    Request a Quote: http://americanbeerequipment.com/request-a-quote/

    CraftCan35 System starting at $63,986
    Name:  12.28.2017  CraftCan35_2.jpg
Views: 662
Size:  99.2 KB

  15. #15
    Join Date
    Oct 2013
    Location
    Lincoln, NE.
    Posts
    1,072

    Will you be attending the Craft Brewers Association Conference?

    Check out this equipment in person at the Craft Brewers Association Conference this year in Nashville!

    Learn more: www.americanbeerequipment.com
    Email: info@americanbeerequipment.com
    Phone: (402)475-BEER
    Follow us on Facebook: https://www.facebook.com/americanbeerequip/

    Request a Quote: http://americanbeerequipment.com/request-a-quote/
    Name:  2018 CBC -Booth Advertisement.jpg
Views: 649
Size:  100.7 KB

Page 1 of 6 123 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •