Page 3 of 3 FirstFirst 123
Results 31 to 36 of 36

Thread: DIY keg washer pump sizing???

  1. #31
    Join Date
    Sep 2015
    Location
    Europe
    Posts
    20
    Anyone see a problem in using same pump in brewhouse and keg washing?

    It is open impeller mobile pump with VFD (1.5 kW, 5 m3/h, 24m) that is used for mashing in, sparging and transfer BK-HX-FV.
    I'd like to take advantage of mobility and give it another purpose with saving some funds, but I'm not sure if that could be problem due to hard chemical treatment in keg washing or something else... on the other hand we use same chemicals at MLT or BK CIP so I feel lost at the moment.. or I am over-complicating it?

  2. #32
    Join Date
    Dec 2017
    Location
    Minneapolis, MN, USA
    Posts
    25
    Quote Originally Posted by dark_s View Post
    Anyone see a problem in using same pump in brewhouse and keg washing?

    It is open impeller mobile pump with VFD (1.5 kW, 5 m3/h, 24m) that is used for mashing in, sparging and transfer BK-HX-FV.
    I'd like to take advantage of mobility and give it another purpose with saving some funds, but I'm not sure if that could be problem due to hard chemical treatment in keg washing or something else... on the other hand we use same chemicals at MLT or BK CIP so I feel lost at the moment.. or I am over-complicating it?
    I'm no expert but I believe as long as the seals are rated for the chemicals, you should be ok. Ask the manufacturer if they're still around, but makes sense to me that it would work.

  3. #33
    Join Date
    Oct 2017
    Location
    western , NY
    Posts
    87
    Quote Originally Posted by dark_s View Post
    Anyone see a problem in using same pump in brewhouse and keg washing?

    It is open impeller mobile pump with VFD (1.5 kW, 5 m3/h, 24m) that is used for mashing in, sparging and transfer BK-HX-FV.
    I'd like to take advantage of mobility and give it another purpose with saving some funds, but I'm not sure if that could be problem due to hard chemical treatment in keg washing or something else... on the other hand we use same chemicals at MLT or BK CIP so I feel lost at the moment.. or I am over-complicating it?
    If your speaking of the one in the pictures of this thread, I am hoping to use mine for whirlpool and CIP/kegwashing.

    I found that I needed to upgrade the inlet hose to 1.5" ID brewery grade hose otherwise I got cavitation pretty bad with the 1" ID continental hose.
    I tore mine down to the basic components and made sure I could get replacements parts for everything which I found cheap on ebay (A UL listed frame motor would cost me a couple hundred bucks if I ever had to replace it and thats by far the most costly component)
    everything in the pump housing is stainless or EDPM rubber except the ceramic or carbon pump seal (either are available for like $4)

  4. #34
    Join Date
    Dec 2011
    Location
    Olathe, KS
    Posts
    80
    I was looking at the Velocio for a keg washer but i dont have the time to sit down and program it myself. Would you be willing to sell a copy of your script with a bit of documentation on your cabinet, PLC and the HMI?

    Chris

  5. #35
    Join Date
    Dec 2011
    Location
    Olathe, KS
    Posts
    80
    Quote Originally Posted by HogMountain View Post
    Mine arrived yesterday. At least it is packed well. I won't know how it performs for a while. The pump head probably needs to be passivated after cleaning it.


    Any feed back on these pumps?

    Chris

  6. #36
    Join Date
    Apr 2013
    Location
    GA
    Posts
    37
    Quote Originally Posted by Noble31 View Post
    Any feed back on these pumps?

    Chris
    No from me. Mine is still in the box. Maybe augiedoggy can give some feedback.

Page 3 of 3 FirstFirst 123

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •