Results 1 to 3 of 3

Thread: Malt silo dust control

  1. #1
    Join Date
    Apr 2010
    Posts
    154

    Malt silo dust control

    Does anyone have any ideas on how to keep dust down when filling your silos? I am trying to do this inexpensively. Thanks.

  2. #2
    Join Date
    Aug 2010
    Location
    Enterprise, Oregon
    Posts
    1,955
    How are you filling your silo?

    If the truck is blowing the grain in, you should have two down tubes from the top of the silo: One to fill, the other to vent the dust and air. The second down tube should be connected to a bag-house dust filter.

    Dust is not just an irritant, it's a major explosion waiting to happen.
    Timm Turrentine

    Brewerywright,
    Terminal Gravity Brewing,
    Enterprise. Oregon.

  3. #3
    Join Date
    Jul 2015
    Location
    Ocean, NJ
    Posts
    22
    our dust bags clogged too easily and then we'd start blowing dust out the top of the silo's PRV or whatever equivalent is up there. We rigged up a giant blow off bucket like you might use on a fermenter.

    We use a flexible (fernco-style) pipe fitting so it's easly removable, to attach an addtional length of pipe (of the same diameter) to the down tube that makes it long enough to fit well into a 55 gallon drum which we fill with water. The air pressure is plenty to bubble through the water and still vent the tank, but the dust gets trapped by the water. It makes a dusty sludgy mess inside the drum by the time we're done but it's easier to clean up and less hazardous presumably then dust EVERYWHERE!

    Glenn

Similar Threads

  1. Best option for dust collection during silo filling?
    By lhall in forum Malt Q&A (Available for Sponsorship)
    Replies: 3
    Last Post: 01-26-2016, 10:54 AM
  2. Silo malt is always short...
    By dereknobleluke in forum Malt Q&A (Available for Sponsorship)
    Replies: 4
    Last Post: 05-18-2013, 10:49 AM
  3. Malt silo
    By Graydon in forum Equipment Q&A (Sponsored by Sungood Machinery)
    Replies: 6
    Last Post: 12-05-2012, 10:54 AM
  4. Malt dust- how hazardous is it?
    By Michael Murphy in forum Malt Q&A (Available for Sponsorship)
    Replies: 18
    Last Post: 04-24-2008, 11:30 AM
  5. Malt silo
    By Carlos Félix in forum Malt Q&A (Available for Sponsorship)
    Replies: 2
    Last Post: 08-08-2005, 10:25 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •