Announcement

Collapse
No announcement yet.

din sample valve perlick style

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • din sample valve perlick style

    We are getting a Anton Parr co2/o2 meter. My filter has a sample valve that attaches with a DIN fitting and I will not be able to attach the clamp of the unit onto it. So looking for a perlick style valve. I know I can put one further down the line with a TC fitting, but the area where the sample valve is at on my filter is a really good place to check for O2
    thanks
    Chris
    Chris Brugger
    Brewer
    Otto's Pub and Brewery
    814-867-OTTO

  • #2
    Call Perlick and see if they can set one up for you: https://www.perlick.com/commercial/p...pling-valves-2

    Alternately, buy one w/threaded end and make one up yourself.

    Don't get the plastic knob on the valve. They have an SS knob as an option. The plastic knob lasts about a week before breaking.
    Timm Turrentine

    Brewerywright,
    Terminal Gravity Brewing,
    Enterprise. Oregon.

    Comment

    Working...
    X