Results 1 to 2 of 2

Thread: Rexam cans with Crown ends?

  1. #1
    Join Date
    Jan 2003

    Rexam cans with Crown ends?

    Seems like specs are close, but I'd like to know that they are compatible. Could someone please offer me confirmation either way? Thank you!
    Phillip Kelm--Palau Brewing Company Manager--

  2. #2
    Join Date
    Aug 2015
    Denver, CO, USA

    Mixing cans and ends from different manufacturers

    Yes, we've found no problems mixing cans and ends between manufacturers. You should follow the seam specs from the manufacturer of the ends rather then the cans since the material from the ends factors in 3x in the seam thickness and the cans factor in 2x. It's likely your seamer setup won't even need to change, but you may find you want to make some small tweaks to obtain perfection again.

    Good luck,

    Josh Van Riper
    Twin Monkeys

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts