Results 1 to 1 of 1

Thread: GAI 3003A-Bier bottle filler and labeler for sale

  1. #1
    Join Date
    May 2017
    Richmond, VA

    GAI 3003A-Bier bottle filler and labeler for sale

    We are selling our GAI 3003A monoblock filler and Enos labeler as we are moving to a larger GAI machine. This is in great condition and can package up to 3,000 bottles per hour. We will include change out parts to accommodate, 12oz longneck bottles, 12oz stubby bottles, 500ml and 750ml bottles.

    We are asking $239,000 / OBO. Buyer will need to arrange shipping from our warehouse
    This is a nice discount from the original cost and there is no wait time.
    email with inquires

    See a video of the machine in action here filling 12 oz bottles:

    GAI-3003A-BIER Automatic monoblock in stainless steel composed by:
    -Two phases rinsing-blowing machine (ex. water+gas) with 12 places in
    stainless steel for bottles with maximum diameter 115 mm.
    A gripper device takes the bottle by the neck and -through a system
    of sprocket-wheel-rack pushed by a cam – turns it upside down.
    The nozzle enters in to the bottle neck for 80mm; there is injection only in
    bottle presence. There is no contact between the bottle neck and the injector
    parts. The two injection circuits are completely separated. The injection
    time and set up are easily adjustable by an external cams system.
    The dripping water is recovered in a closed circuit without wetting the
    machine. The gripper then turns the bottle and releases it in the discharge
    star, which carries it onto the conveyor belt.
    -12 spouts pressure filler for bottles with maximum diameter 115 mm with:
    bottle double pre-evacuation: it breathes in the air contained in the bottle,
    it replaces this air with pressurized CO2 it breathes in the air again before
    equilibrating the bottle pressure with the gas contained in the tank. In this
    way it eliminates ~ 99% of the oxygen contained in the bottle. It uses a fluid
    ring pump equipped with water recycle tank
    - bottle de-gassing at the filler exit
    - pneumatic pedestals on the same axle as the bottles with return by cam
    - tank and spouts cams height electrical adjustment
    - automatic washing of the exterior of the spouts
    - automatic pedestals lubrication
    - a thin jet of water induces the beer foam just before the crown capping
    Single head 4270W crown capper – fed up by vibratory hopper
    The entrance and the transfer between rinsing and filling are made
    by infeed screw that drive and synchronize the bottles.
    All stations height adjustment is electrical (rinsing, pressure filling and capping)

    3003A-BIER-700 Set of stars for different size cylindrical bottles
    1 3003A-BIER-800 Infeed screws for different size cylindrical bottles

    Automatic labeler
    -Single label station capable to apply one or two labels from same roll
    -Machine to be installed in-line
    -Variable speed drive
    -Touch screen PLC
    Speed: up to 3,000 bottles/hour (INVERTER)
    Additional infeed screw

    1.5 meters long
    5 chains wide with bottle jogger to prevent jams
    0.5 hp drive motor
    Stainless steel construction
    Adjustable speed motor, 1 HP
    Power: 220 three phase
    6. 2 DOG-CC02 90 DEGREE CORVER
    With support legs
    7. 1 DOG_NC-0.5 CONVEYOR CHANNEL, 120x120 mm
    0.5 meter sections
    8. 1 DOG_NC-1.0 CONVEYOR CHANNEL, 120x120 mm
    1.0 meter sections
    2 meter linear pack off table with case conveyor

    Attached Images Attached Images  
    Last edited by jpmurtaugh1; 05-17-2018 at 02:03 PM. Reason: adding contact info

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts