Results 1 to 4 of 4

Thread: Topline centrifugal pump c114...opinions,comments, critisism?

  1. #1
    Join Date
    Jan 2018
    Vancouver, WA, USA

    Question Topline centrifugal pump c114...opinions,comments, critisism?

    Just looking for any positive or negative feedback from someone who has used a Topline centrifugal pump before. Thanks for taking the time to read and share!



  2. #2
    Join Date
    Apr 2010

    Industry Workhorse

    I think you'd be hard pressed to find anyone who hasn't used a Top Line C114!

    Pretty much industry standard. And lots of other brands are based on the same model, use the same seals, etc.

    Learning to replace a C114 seal is a right of passage, and a very good, basic skill to learn.

    One thing to keep in mind (at least in my experience) is that they don't particularly love pumping hot wort with hop particles in it (read: whirlpool.) Generally you don't have much of a choice on smaller brew houses, so I would suggest rigging up a system to spray a small stream of water on the back of the seal when running hot wort through it.

    Cheers- Mike

  3. #3
    Join Date
    Aug 2010
    Enterprise, Oregon
    These are the easiest pumps out there when it comes to maintenance.

    Be sure you get one with a washed seal--or rig up a water flow to go over the seal. Our Vorlauff pump ate a seal in less than a month before I rigged a seal wash for it. With some water flowing over the seal, it has now gone three years with no problems. Pretty simple to do, but just save the headache and buy it with one.
    Timm Turrentine

    Terminal Gravity Brewing,
    Enterprise. Oregon.

  4. #4
    Join Date
    Jul 2012
    Burnaby BC Canada
    Like others have said, it's pretty hard to beat a C114 pump - which is why Tri-Clovers original design has been replicated with minimal changes by nearly everyone. They're simple, easy to maintain, and as long as you take care of them they will last forever.

    They have limitations of course, but for the price they can't be beat. They don't handle suspended solids as well as positive displacement pumps, and they aren't self-priming.

    However, when you can get a C114 for just over a grand you just can't beat it for value.
    Last edited by CPESystems; 05-30-2018 at 08:30 AM.
    Your CPE Systems Team!
    CPE Systems Inc.

Similar Threads

  1. Centrifugal Pump and Hop Recirculation
    By kthomlinson in forum Hops Q&A (Available for Sponsorship)
    Replies: 12
    Last Post: 07-03-2015, 07:12 AM
  2. Jet05 centrifugal pump
    By NatchezBrew in forum Equipment Q&A (Sponsored by Sungood Machinery)
    Replies: 0
    Last Post: 09-29-2013, 05:13 PM
  3. Centrifugal Pump Gasket
    By MikeA in forum Equipment Q&A (Sponsored by Sungood Machinery)
    Replies: 1
    Last Post: 06-06-2010, 03:29 PM
  4. Centrifugal vs diaphragm pump
    By oppigards in forum Process and Techniques (Sponsored by CPE Systems)
    Replies: 9
    Last Post: 05-13-2004, 03:53 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts