Announcement

Collapse
No announcement yet.

CFR Title 27 25.35 - Tanks and Measurement

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • CFR Title 27 25.35 - Tanks and Measurement

    In the Fed regulations I saw this below:

    §25.35 Tanks.
    Each stationary tank, vat, cask or other container used, or intended for use, as a receptacle for wort, beer or concentrate produced from beer shall:

    (a) Be durably marked with a serial number and capacity; and

    (b) Be equipped with a suitable measuring device. The brewer may provide meters or other suitable portable devices for measuring contents of tanks or containers in lieu of providing each tank or container with a measuring device.


    How do you do this with a conical or unitank? This is for a very small 3BBL Nano. The portable meters that go in line are around a grand and they only tell how much went into the FV, not how much is currently in there after blowoff. What am I not seeing when I think about this? The only thing I can think of is having a portable length of hose on a elbow that comes from the bottom port and then letting it rise up the side of the tank when I need to take a measurement. This method would only work for liquid at ambient pressure also.

    Thanks for all your help!
    Last edited by MortChateau; 06-13-2018, 06:54 AM.
Working...
X