Brand new, we're going a dif. direction, don't need. Never used, never even hooked up. Sweet 10 bbl SKID MOUNTED setup available RIGHT NOW, shipping from 92129

You pay $71,500 plus actual shipping and 4% state tax if you're in CA (you can pay it if you like, or we can). If you're out of CA, $71.5k plus actual shipping gets you your dream system.

Used by such breweries as Rogue, Trillium, New Realm and many others, this is your pilot or production system.

Mash Tun
Effective volume: 10 BBL
Milled plate false bottom
Rake motor: 2.2 Kw SEW Eurodrive Rake Motor,
variable speed with reverse
Grain out Paddles: Integral to the rake, activate in
reverse direction
Dedicated sanitary centrifugal pump, variable speed
control
Glass Grant and underlet capability
Inner container: SUS304,thickness 3mm, 2B finished
Outer Shell: SU304, thickness 2mm, brushed finish
Insulation material: polyurethane, thickness: 80mm
Grain out side mandoor with removable chute
Vorlauf, Sparge Ring, strike water fill port
Oversized glass window mandoor with interior light
Necessary fittings and valves, pipeline, dual CIP balls

Kettle
Effective volume: 10 BBL. 20% headspace
Dedicated sanitary centrifugal pump, variable speed
control
Inner container: SUS304,thickness 3mm, 2B finished
Outer shell: SU304, thickness 2mm, brushed finish
Insulation Material: polyurethane, thickness: 80mm /
rock wool
Heating method: Direct fire, fully modulating Economite
Midco 4400DS HTD forced air burner.
Oversized glass window manway with interior light
Steam Vent: Removable condensing steam vent
Necessary fittings and valves, pipeline, CIP wash ball
Rotatable racking arm

Heat Exchanger: SU304 plate and frame 8 sq meter
surface area

Control Panel
Centralized control panel
Temperature displays for all critical process
VFD controls for Pumps and rake
Burner controls
Lighting controls
Integrated circuit breakers

Utility Connections
Electricity: 220v 3-Phase for mash rake, wort pumps,
and main control panel. 30 Amp Breaker Required.
Water: 1" NPT female inlets at Brew House for hot and
cold water sources.
Gas Pipe Size: Minimum 3/4", larger sizes may be
required due to distance from meter and pressure drop.
Gas pressure required: 7" W.C (water column) minimum 14" W.C. maximum at burner
location.

Includes the optional BREWHOUSE PRE CHILLER
Add 1 sq. meter ground water pre-chiller to brewhouse
Chills incoming groundwater before main heat
exchanger
Plate and frame - all stainless
Glycol control integrated into main panel

Name:  Capture.jpg
Views: 107
Size:  96.7 KB