getting some odd foam issues with our hoppy wheat ale.
serving tank is at 35-37 f, and head preasure 11psi, which is standard for us.
glycol in the trunk line is at 31
the walk in at the front bar- with about 12' of exposed beer line inside- gets alot of opening/closing doors- big range from 32 coldest-38 hottest
at open, beer pours fine. but at night when it gets busy we get little explosions of foam. will pour ok, then explode with foam, then ok, then foam, etc.
couldnt see any issues at the tank, trunk line seems cold, cleaned out flojet beer pump, no change in problem.
check the tap for a clog/obstruction? some sort of odd co2 leak or loose fitting somewhere?
im a bit stumped....
serving tank is at 35-37 f, and head preasure 11psi, which is standard for us.
glycol in the trunk line is at 31
the walk in at the front bar- with about 12' of exposed beer line inside- gets alot of opening/closing doors- big range from 32 coldest-38 hottest
at open, beer pours fine. but at night when it gets busy we get little explosions of foam. will pour ok, then explode with foam, then ok, then foam, etc.
couldnt see any issues at the tank, trunk line seems cold, cleaned out flojet beer pump, no change in problem.
check the tap for a clog/obstruction? some sort of odd co2 leak or loose fitting somewhere?
im a bit stumped....
Comment