We got a "turn-key" system from China, and when everything was installed, the new guys put the solenoids right off the ground. They are constantly getting wet from day to day cleaning, and condensation. I have been sealing them with flex seal, but I am running out of solenoids to replace, and I can't find the exact model due to China not really having a brand or part number. I was hoping someone could help identify a replacement.
Announcement
Collapse
No announcement yet.
Help replacing solenoids
Collapse
X
-
What size are the threaded ports for liquid? What voltage is the coil? These are the only two things you need to know to order new ones.
I use only Asco Red Hat solenoids around the brewery, as it makes stocking repair kits easier.
The Red Hats also have a sealed coil, which will make them last much longer. Use a waterproof connection box and fittings, and Bob's yer uncle!Timm Turrentine
Brewerywright,
Terminal Gravity Brewing,
Enterprise. Oregon.
Comment
-
Originally posted by TGTimm View PostWhat size are the threaded ports for liquid? What voltage is the coil? These are the only two things you need to know to order new ones.
I use only Asco Red Hat solenoids around the brewery, as it makes stocking repair kits easier.
The Red Hats also have a sealed coil, which will make them last much longer. Use a waterproof connection box and fittings, and Bob's yer uncle!
I looked at the ones from GW Kent, but can't tell if the coil will fit the current ones. So I sent an email off, to see if they could answer.
Thanks guys.
Comment
-
I get my coils from Omega Engineering. I'm sure they will have what ya need. www.omega.com
Good luck!
-Scott
Comment
Comment