Results 1 to 1 of 1

Thread: need to replace Burned up heating elements

  1. #1
    Join Date
    Mar 2011
    Location
    Nashville, TN
    Posts
    127

    need to replace Burned up heating elements

    Our brewery uses electric heating element for the hot liquor tank.

    We've burned up two of the Mcmaster Carr stainless steel units...about $280 / each. I don't know if it's salts, acids or what that's causing the corrosion and ultimate failure of these elements, but I would like to get a recommendation on a similar unit.

    we sometimes put lactic acid, calcium chloride and / or calcium sulfate in the HLT depending on the brew.

    Our wiring is 3 phase, 240V, i believe max amperage of 25V.

    thanks for any input.

    3656K162 Screw-Plug Mount Immersion Heater, 304 Stainless Steel, 240V AC, Three Phase, 10500W, 28" Long
    Last edited by Swags; 07-24-2018 at 05:43 PM.
    Scott Swygert
    Founder - Honky Tonk Brewing Co.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •