Results 1 to 3 of 3

Thread: BrauKon HopGun advice

  1. #1
    Join Date
    May 2017
    Location
    London, UK
    Posts
    1

    BrauKon HopGun advice

    Hi,

    We've been using the BrauKon HopGun for almost a year now and after a lot of trial and error we have a pretty solid process figured out. We've had quite a few issues with large clumps of undissolved hop pellet being wedged at the bottom of the hopgun after transferring back to FV, so have been trying to find a way to rectify this. The solution we have came up with has been pretty successful, but means that we are not using the hopgun in the way that it was originally intended. Our process at the minute is:

    - Wait until beer reaches final gravity/passes diacetyl test, crash to 8c, dump/harvest yeast.
    - Purge hopgun, fill halfway with beer under pressure.
    - Depressurise hopgun, open lid and add hops under positive pressure, re-pressurise hopgun
    - Allow hops to soak for 5 mins, then allow beer to fill hopgun.
    - We then apply top pressure to the top of the hop gun to push the entire contents back into the FV. We repeat this step, filling and the pushing everything back into the FV, until we can see there are no hops left in the hopgun by looking through the bottom window.
    - We then recirculate, out of the sample port midway up the FV and into the bottom of the cone, for 6 hrs.
    - After 6 hrs, the beer is pushed back into the FV, crashed to -1c and carbed right away.

    - Our typical brewlength is 25-37HL and we are dry-hopping at 8-20g/l depending on the product.

    This method has been pretty successful, but is very time consuming and there is obviously a better way to use the hopgun. I've heard of a lot of other breweries having similar problems with hops clumping at the bottom of the hopgun, but cant really find much info on how to rectify this issue. I am therefore wondering if anyone else has had any similar issues and has found a solution that works for them?

    Cheers

    Craig

  2. #2
    Join Date
    Jun 2014
    Location
    Adelaide, South Australia, Australia
    Posts
    3
    Ive got a hop gun as well and am yet to see a vaild use for it with pellets. If all you are doing is putting the hops into the tank, why not skip the hopgun, pour the hops in and recirculate via a centrif pump? Really struggling to see what the point of the hop gun is when using pelletised hops?

    Fil

  3. #3
    Join Date
    Oct 2002
    Location
    Chesterfield, UK
    Posts
    1,866
    You are wasting thousands of pounds worth of equipment by not using it as designed. The whole point of the hopgun is to retain the hops, normally whole hops in the hop gun, and recirculate beer through. So you don't have to strain off all the hop residues before beer transfer.It is not simply a means of blowing hops into the FV. Do a search for Braukon Hopgun and pick up the following you tube video, (A Look Inside The DuClaw Brewing Company Hop Gun )which gives a pretty good description of the basics of operation. Whatever you do, make sure the whole system, pump, hoses, hop gun after adding hops is fully deaerated - blowing CO2 through from the takeoff point of the FV back to the inlet point (whilst of course the beer valves are closed) is essential to maintain beer quality. Claw show pellets, but many people us whole hops. You can also blow back the beer from the hop gun back into the FV if the setup is correct.
    dick

Similar Threads

  1. HELP ! Need advice.
    By Susan in forum Malt Handling Q&A (Available for sponsorship)
    Replies: 11
    Last Post: 08-20-2018, 03:16 PM
  2. Using a Braukon Hopgun with cryohop powder?
    By SLonsdale in forum Process and Techniques (Sponsored by CPE Systems)
    Replies: 0
    Last Post: 03-01-2018, 08:09 AM
  3. Any Braukon users here?
    By AndrewR in forum Equipment Q&A (Sponsored by Sungood Machinery)
    Replies: 1
    Last Post: 10-28-2015, 02:12 PM
  4. CTZ Advice
    By brundage in forum Hops Q&A (Sponsored by Yakima Chief Hops)
    Replies: 0
    Last Post: 03-28-2014, 07:44 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •