Results 1 to 3 of 3

Thread: What is the best way to install temp probes into your vessels?

  1. #1
    Join Date
    Feb 2013
    Location
    United States
    Posts
    6

    What is the best way to install temp probes into your vessels?

    Does anyone have any advise on the best way to secure these wire temp probes into the sensor ports on the sides of the fermenters and boil kettles ect? Do they just insert loose or is there a good way to secure them in place?


    Name:  20180901_133139.jpg
Views: 156
Size:  89.1 KB

  2. #2
    Join Date
    Sep 2013
    Location
    Massachusetts
    Posts
    231
    Quote Originally Posted by BaleenBrewing View Post
    Does anyone have any advise on the best way to secure these wire temp probes into the sensor ports on the sides of the fermenters and boil kettles ect? Do they just insert loose or is there a good way to secure them in place?


    Name:  20180901_133139.jpg
Views: 156
Size:  89.1 KB
    Are they threaded? If so I like these from McMaster https://www.mcmaster.com/#liquid-tig...grips/=1ega12r. If there is no thread then I would just use some silicone. Don't forget heat transfer paste inside on the probe.

  3. #3
    Join Date
    Feb 2013
    Location
    United States
    Posts
    6
    Now I wish they were threaded. Thanks for the reply it's good stuff and very useful. I appreciate it.
    Alex

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •