I am carbonating a soft drink in a 1bbl brite tank (SS Brewtech brite tank).
The tank has a 15 psi operating pressure. Does this mean this would be the maximum psi I can use to carbonate? So at 3 degrees celsius the maximum volumes of carbonation would be 2.96 (based on a carbonation chart)?
If this is the case would it be 15 PSI + wetting pressure? Or should I not set the regulator above 15psi?
The tank has a 15 psi operating pressure. Does this mean this would be the maximum psi I can use to carbonate? So at 3 degrees celsius the maximum volumes of carbonation would be 2.96 (based on a carbonation chart)?
If this is the case would it be 15 PSI + wetting pressure? Or should I not set the regulator above 15psi?
Comment