Results 1 to 2 of 2

Thread: Need Dimension on Pall 2 High Lenticular Center Post

  1. #1
    Join Date
    Mar 2004
    Location
    San Diego, CA
    Posts
    52

    Need Dimension on Pall 2 High Lenticular Center Post

    Hello, I am reaching out to the forum after many attempts to get the info from Pall. Does anyone out there who uses Pall Supra Disc 2 " with back flush plates" have a measurement of their center support stem..I am looking for both overall length and between the threads..My current center rod is 21" total and I need to know if it is tall enough to use Pall filters with their back flush plates..meaning the Whole Enchilada 2 high filter and other plates! Really need some help..photos and measurements can be sent to: pubbrewer@hotmail.com..Thanks Dean

  2. #2
    Join Date
    Jun 2011
    Location
    Richmond, VA.
    Posts
    425
    It says that flat gasket is 10.7" high here is the link to there web site.
    https://shop.pall.com/us/en/biotech/...es-zidgri78lmk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •