Results 1 to 3 of 3

Thread: Perlite grades / Pressure Leaf filtration

  1. #1
    Join Date
    Apr 2010
    Location
    Moorpark Ca, USA
    Posts
    174

    Perlite grades / Pressure Leaf filtration

    I've been running a Velo 4 m^2 filter for about a year and it's been great until Harborlite stopped selling 400 grade perlite. We tried mixing some 200 grade in with the 500 to get a theoretical "400" but it gets plugged up.

    I was thinking of pre-coating with cellulose and 200, then running the body feed with 500 with the idea that the filter cake would be finer at the bottom and coarser at the top.

    Also, we started with a certain amount of cellulose and began backing off lately. Is the purpose of the cellulose just to set the filter bed or will this improve clarity too?

    Does anyone have any thoughts on this....or have a pallet of 400 grade to sell?
    Chris Enegren
    www.enegrenbrewing.com

  2. #2
    Join Date
    Sep 2005
    Location
    Louisville, KY
    Posts
    951
    Joel Halbleib
    COO / Zymurgist
    Goodwood Brewing Co
    636 East Main St
    Louisville, KY
    goodwood.beer

  3. #3
    Join Date
    Oct 2002
    Location
    Chesterfield, UK
    Posts
    1,787
    Mixing grades generally doesn't give something in between the grades. In fact it seems to make a final grade finer than the finer of the two grades and blinds filters faster.
    dick

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •