Results 1 to 5 of 5

Thread: Handling partial amounts of dry yeast

  1. #1
    Join Date
    Oct 2018
    Location
    México
    Posts
    3

    Handling partial amounts of dry yeast

    Dry yeast packs tend to come in either 11 g sachets or full 500 g packs. The former are unwieldy to start mayor batches of big beers but 500 g can be a bit much when only 250 g or 300 g are needed. Instructions heavily emphasize that yeast loses viability as soon as the pack is opened and even if quickly vacuum sealed they are useful for like 2 weeks at most.

    What part of the air is what causes opened dry yeast to go bad, the oxygen or the moisture? Can handling yeast packs in a glove box with a nitrogen atmosphere prevent this issue?

  2. #2
    Join Date
    Apr 2015
    Location
    Lakewood, CO
    Posts
    34
    We routinely use partial packs on our 3bbl system. We only need ~250g per batch, so we save the rest in the cooler. I've kept a pack for at least a couple months without noticing significant visibility issues for any of the strains we use. I squeeze as much air out as I can, and tape the pack shut for later. YMMV, of course.

  3. #3
    Join Date
    Nov 2013
    Location
    Chicago IL
    Posts
    43
    Quote Originally Posted by spetrovits View Post
    We routinely use partial packs on our 3bbl system. We only need ~250g per batch, so we save the rest in the cooler. I've kept a pack for at least a couple months without noticing significant visibility issues for any of the strains we use. I squeeze as much air out as I can, and tape the pack shut for later. YMMV, of course.
    I've been wanting to do this also, are there any fears of contamination? Would you need to sanitize the Ziploc bag and pour it in the bag in a clean environment?

  4. #4
    Join Date
    Apr 2015
    Location
    Lakewood, CO
    Posts
    34
    When I open a new pack, I typically wear nitrile gloves, and sanitize (with fresh Star-San) my gloved hands, a pair of scissors, and the outside of the yeast brick near the top flap. I cut open the pack with the sanitized scissors, pour in the pitch, and fold the top of the pack over a couple times like a bag of chips. Then i use the ubiquitous blue painter's tape to hold it shut, and mark the date i opened it. Before I reopen it, I use gloves and I respray the outside of the pack in case dust settled on it. Haven't had any contaminations thus far.

    Edit: I forgot they're using zip-top bags now. So you don't even need the tape. Just partially close the zip, squeeze the air out, finish sealing the zip, and you're good to go. I still roll and tape the flap to keep it compact, and to write the date on the pack.
    Last edited by spetrovits; 10-30-2018 at 09:31 AM.

  5. #5
    Join Date
    Oct 2018
    Location
    México
    Posts
    3
    Quote Originally Posted by spetrovits View Post
    We routinely use partial packs on our 3bbl system. We only need ~250g per batch, so we save the rest in the cooler. I've kept a pack for at least a couple months without noticing significant visibility issues for any of the strains we use. I squeeze as much air out as I can, and tape the pack shut for later. YMMV, of course.
    This is cool to know, I can live with a month or two of yeast life. Thanks for the tip.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •