Results 1 to 3 of 3

Thread: Budget Friendly Grain Mill for 5-7 bbl brewhouse

  1. #1
    Join Date
    Jun 2017
    Location
    Washington
    Posts
    5

    Budget Friendly Grain Mill for 5-7 bbl brewhouse

    Hi All, Sorry for making a new thread on this but after a couple days searching I just can't find any definitive answers.

    Looking at the Crankandstein 328g or 328d mill for our soon to be brewery. These seem fairly straight forward and will help with the startup budget. I am very confident we can easily build the right size stand and hopper but having difficulty determing the following:

    *What motor should I use? I saw recommendations for a 3/4hp and I would definitely want it to be explosion proof and run off 110v power. I'm having trouble finding suggestions that are not seriously over my budget, any suggestions would be very helpful, I believe it needs to run between 100-300rpm max.

    *Any suggestions on how to connect the motor to the mill? Do I need to use a pully system or is there a direct drive?

    Would love to hear thoughts from all of you breweries who had to start out this way. I plan on making a stand that has an enclosed cabinet, open the cabinet, stick the small garbage can in, close the door, fill up the can and move on to the next one.

    Thanks again for any suggestions or help.

    Ryan

  2. #2
    Join Date
    Jul 2013
    Location
    Columbus, OH
    Posts
    16

    HEre's what we used for thousands of bbls on our 10bbl:

    We used a regular TEFC 1hp motor with our 328 mill.

    https://www.amazon.com/Worldwide-Ele.../dp/B00K8ED8TI

    We used a 3 phase motor with a single-to-3 phase VFD that offers constant torque or you can use a gear reducer. We decided to use a gear reducer from surplus center:

    https://www.surpluscenter.com/Power-...33-5-L-56C.axd

    The 5:1 gear reducer will take a standard 4 pole motor (1800 RPM) and give you 360 RPM. If you buy a 2 pole (3600 RPM) motor, you will need to get a 10:1 reducer (obviously) slower motors run longer.

    You'll need a couple of lovejoy couplers and keep some spare rubber inserts around (they always go out when you're in the middle of milling). You'll also need to fabricate some kind of way to hold this all together.











    Quote Originally Posted by PorterBrewingCo View Post
    Hi All, Sorry for making a new thread on this but after a couple days searching I just can't find any definitive answers.

    Looking at the Crankandstein 328g or 328d mill for our soon to be brewery. These seem fairly straight forward and will help with the startup budget. I am very confident we can easily build the right size stand and hopper but having difficulty determing the following:

    *What motor should I use? I saw recommendations for a 3/4hp and I would definitely want it to be explosion proof and run off 110v power. I'm having trouble finding suggestions that are not seriously over my budget, any suggestions would be very helpful, I believe it needs to run between 100-300rpm max.

    *Any suggestions on how to connect the motor to the mill? Do I need to use a pully system or is there a direct drive?

    Would love to hear thoughts from all of you breweries who had to start out this way. I plan on making a stand that has an enclosed cabinet, open the cabinet, stick the small garbage can in, close the door, fill up the can and move on to the next one.

    Thanks again for any suggestions or help.

    Ryan

  3. #3
    Join Date
    Jun 2017
    Location
    Washington
    Posts
    5
    Thanks for the advice/info! Cheers!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •