Hello,
Does anyone have some advice on the best way to transfer from fermentor to brite tank, (both tanks are 3.5 bbl)
I have a 1/5 HP mag-drive centrifugal pump that pumps 18 GPM and no VFD.
Would it be best to not use the pump and transfer with CO2 pressure differential by bleeding off pressure from the brite tank and keeping the fermentor at a higher pressure.
or
Use the pump and balance the pressure between both tanks.
or
A better idea!
I'm worried about the pump churning the beer.
Thanks
Jeff
Does anyone have some advice on the best way to transfer from fermentor to brite tank, (both tanks are 3.5 bbl)
I have a 1/5 HP mag-drive centrifugal pump that pumps 18 GPM and no VFD.
Would it be best to not use the pump and transfer with CO2 pressure differential by bleeding off pressure from the brite tank and keeping the fermentor at a higher pressure.
or
Use the pump and balance the pressure between both tanks.
or
A better idea!
I'm worried about the pump churning the beer.
Thanks
Jeff
Comment