Hi There,
Im looking for a little advice. The water in our town, as you can see from the thread below has a TDS averaging in the 450 range with certain minerals being very high for certain beer styles. What i am debating doing is putting a light commercial 350 GPD Ro system in to allow me to slowly fill my 550 gallon HLT. Im only brewing on a 2.5bbl system, so i dont need to fill the tank quickly. I only turn the HLT on generally the night before a brew day, so im trying to figure out the correct way to hold the water.
There seem to be several ways to do it, some of which likely arnt good options:
Redose with Chlorine and treat with K Meta on brewday
Find or make a UV Light Recirc System and keep the HLT recircing.
Other options?
Thanks Much,
Jeff Marquis
Granite Coast Brewing Company
Im looking for a little advice. The water in our town, as you can see from the thread below has a TDS averaging in the 450 range with certain minerals being very high for certain beer styles. What i am debating doing is putting a light commercial 350 GPD Ro system in to allow me to slowly fill my 550 gallon HLT. Im only brewing on a 2.5bbl system, so i dont need to fill the tank quickly. I only turn the HLT on generally the night before a brew day, so im trying to figure out the correct way to hold the water.
There seem to be several ways to do it, some of which likely arnt good options:
Redose with Chlorine and treat with K Meta on brewday
Find or make a UV Light Recirc System and keep the HLT recircing.
Other options?
Thanks Much,
Jeff Marquis
Granite Coast Brewing Company
Comment