Setting up a new ProChiller Chilstar and wondering about the acceptable range of glycol temps. I’m programming the temps with a Johnson A421. We have been advised to run the glycol at 27deg. The controller was set to turn “off” at 27 and “on” at 28, meaning the condenser and pump were cycling on/off frequently or constantly running. Have experimented with setting the “on” temp at 30deg to get the pump from cycling quite so often, but I’m unsure what is an acceptable range for my two setpoints. Any guidance?
Also, the pipe insulation is planned to be installed today and I assume that will go a long way toward keeping the glycol temps at a better constant. Please advise, and thanks!
Also, the pipe insulation is planned to be installed today and I assume that will go a long way toward keeping the glycol temps at a better constant. Please advise, and thanks!
Comment