I am looking to remove CO2 tank to new place for easier replacement.
There are 3x10bbl + 2x20bbl in future expansion and 10 head bottle filler to feed. Total distance is 40ft for FVs/BBTs and 60ft for filler.
I installed 0,35" ID PU lines, but there is flow drop (not huge but noticeable) and I am concerned it could make trouble with bottle filler as well with purging tanks.
What diameter and what material would you suggest? I am thinking to use 1/2"ID PPR or PEX tubing, will that be sufficient?
Also, what type of flexible hose you use from second. regulator to FVs/BBT (I"l place quick connects on this one)?
There are 3x10bbl + 2x20bbl in future expansion and 10 head bottle filler to feed. Total distance is 40ft for FVs/BBTs and 60ft for filler.
I installed 0,35" ID PU lines, but there is flow drop (not huge but noticeable) and I am concerned it could make trouble with bottle filler as well with purging tanks.
What diameter and what material would you suggest? I am thinking to use 1/2"ID PPR or PEX tubing, will that be sufficient?
Also, what type of flexible hose you use from second. regulator to FVs/BBT (I"l place quick connects on this one)?
Comment