Floor material for under direct fire brewhouse?

[PerraHermosa]

We have a relatively small (250L) brewhouse that is direct fire. Our kettles sit about 20" off the ground. We are in the process of renovating a new space for the brewpub. We have decided epoxy floors for the cold side but we are at a bit of a loss for the flooring underneath the brewhouse area, which I imagine will experience temperatures above the ~250F rating I've seen on urethane coated concrete spec sheets. We have ripped up tiles, cut drains and will pour our sloped floors in a couple weeks. Should we go back to tile?

[Cascade_Floors]

20inches is enough space. I always recommend putting a plate under the burner to deflect more heat. We would love to help out!

[PerraHermosa]

20inches is enough space. I always recommend putting a plate under the burner to deflect more heat. We would love to help out!

Does your service area cover Costa Rica? ; )

Great idea on the plate under the burner. But what material would you recommend for the brewhouse floor in that area? Epoxy? It's still bloody hot under there.

[PerraHermosa]

Is the same coating material appropriate for walls?

[Cascade_Floors]

shoot me an email I’m sure we can help. I definitely recommend a urethane base. Make sure it’s prepped properly for maximum bondage

[Cascade_Floors]

[QUOTE=PerraHermosa;252460]Is the same coating material appropriate for walls?

We have done many walls in Breweries! I installed a urethane on my Brewery here in Oregon (Snow Peak Brewing Co) we also have done many Fiberglass walls for many other breweries.