Announcement

Collapse
No announcement yet.

Floor material for under direct fire brewhouse?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Floor material for under direct fire brewhouse?

    We have a relatively small (250L) brewhouse that is direct fire. Our kettles sit about 20" off the ground. We are in the process of renovating a new space for the brewpub. We have decided epoxy floors for the cold side but we are at a bit of a loss for the flooring underneath the brewhouse area, which I imagine will experience temperatures above the ~250F rating I've seen on urethane coated concrete spec sheets. We have ripped up tiles, cut drains and will pour our sloped floors in a couple weeks. Should we go back to tile?

  • #2
    20inches is enough space. I always recommend putting a plate under the burner to deflect more heat. We would love to help out!
    Chris Klein
    Cell 541-510-1080
    Office (503) 769-6823
    WWW.CASCADEFLOORS.COM
    chris@cascadefloors.com

    Comment


    • #3
      Originally posted by Cascade_Floors View Post
      20inches is enough space. I always recommend putting a plate under the burner to deflect more heat. We would love to help out!
      Does your service area cover Costa Rica? ; )

      Great idea on the plate under the burner. But what material would you recommend for the brewhouse floor in that area? Epoxy? It's still bloody hot under there.

      Comment


      • #4
        Is the same coating material appropriate for walls?

        Comment


        • #5
          shoot me an email I’m sure we can help. I definitely recommend a urethane base. Make sure it’s prepped properly for maximum bondage
          Chris Klein
          Cell 541-510-1080
          Office (503) 769-6823
          WWW.CASCADEFLOORS.COM
          chris@cascadefloors.com

          Comment


          • #6
            [QUOTE=PerraHermosa;252460]Is the same coating material appropriate for walls?

            We have done many walls in Breweries! I installed a urethane on my Brewery here in Oregon (Snow Peak Brewing Co) we also have done many Fiberglass walls for many other breweries.
            Chris Klein
            Cell 541-510-1080
            Office (503) 769-6823
            WWW.CASCADEFLOORS.COM
            chris@cascadefloors.com

            Comment

            Working...
            X