Announcement
Collapse
No announcement yet.
Spear removal tool recommendations?
Collapse
X
-
I believe the Amazon link is for removing screw in style spears rather than the more standard lock ring style.
As stated the sabco does work but it's not the most fun. But be warned that the sabco can egg the neck of a keg rendering it almost impossible to remove the spear if the C shaped plate on the bottom doesn't fit the neck just right. (I know from experience that it doesn't on some kegs.)
I took the head off of the sabco and had a local fabricator fit it on a large vice screw (around 40 bucks on Amazon I think.) And build a frame around the whole keg. Now I can pull a stem in less than a minute. I'll take some photos and post them later this week.
Comment
-
I'd recommend getting the tool(s) from MicroMatic themselves. If you're using quality Sanke kegs, MicroMatic makes the valves. Be sure you also get a couple of the safety ring knives.
As an aside, I recently needed to buy some more seals for keg valves. None of my usual suppliers carry them anymore. I had seen the seals on MM's website, but they were no longer posted there. I called MM and it seems that they no longer sell them to the public. As a registered brewery (whatever that means), I can buy them, but had to set up a separate account with the kegs division of MM.
I guess a liability problem?
Anyhow, the fellow I spoke to at MM's keg division was very helpful and was able to streamline our repair process some. He also sent me some great viddys on the process, which opened my eyes to some common mistakes that many of us are making! One was that the safety ring knives are made from a soft mild steel, as using a screwdriver--as I have been doing--to remove the ring can damage the slot that ring goes into, making it impossible to seat a new ring. Seems I've been going about this completely wrong, as I was taught by a previous boss.Last edited by TGTimm; 02-03-2020, 03:35 PM.Timm Turrentine
Brewerywright,
Terminal Gravity Brewing,
Enterprise. Oregon.
Comment
-
Originally posted by Ted Briggs View PostThe first is fro drop ins- the second is for screw-ins.
If you never done this before id be glad to show you- maybe sat. before the beerfest? Or I could come up next week.
Let me know
Comment
-
Originally posted by Ted Briggs View PostThe first is fro drop ins- the second is for screw-ins.
If you never done this before id be glad to show you- maybe sat. before the beerfest? Or I could come up next week.
Let me know
Comment
-
Originally posted by TGTimm View PostI'd recommend getting the tool(s) from MicroMatic themselves. If you're using quality Sanke kegs, MicroMatic makes the valves. Be sure you also get a couple of the safety ring knives.
As an aside, I recently needed to buy some more seals for keg valves. None of my usual suppliers carry them anymore. I had seen the seals on MM's website, but they were no longer posted there. I called MM and it seems that they no longer sell them to the public. As a registered brewery (whatever that means), I can buy them, but had to set up a separate account with the kegs division of MM.
I guess a liability problem?
Anyhow, the fellow I spoke to at MM's keg division was very helpful and was able to streamline our repair process some. He also sent me some great viddys on the process, which opened my eyes to some common mistakes that many of us are making! One was that the safety ring knives are made from a soft mild steel, as using a screwdriver--as I have been doing--to remove the ring can damage the slot that ring goes into, making it impossible to seat a new ring. Seems I've been going about this completely wrong, as I was taught by a previous boss.
Cheers, Jon Graber - Micro Matic Packaging Division Sales Manager, Western States and Provinces
Comment
Comment