A gentlemen recommended I add the Differential Bypass Valve in the last pic. My only question where in the loop should I ad it. He also recommended "first in last out" was not quite catching what he meant. Either way, this is how I have it now, since I used shark-pex, I can change the set up reletively easy... I will take any recommendations as he sent me here for answers.
Glycol Chiller is 3/4 HP meant to cool 250 feet. I have three 2BBL fermenters w/ cooling coils (not jacketed), and one 2BBL brite-tank w/ cooling coils (not jacketed). I have four inkbirds and the valves shown will be controlled by inkbirds at 110v.
Slide1 by Jeremy Boucher, on Flickr
Untitled by Jeremy Boucher, on Flickr
Untitled by Jeremy Boucher, on Flickr
Untitled by Jeremy Boucher, on Flickr
Glycol Chiller is 3/4 HP meant to cool 250 feet. I have three 2BBL fermenters w/ cooling coils (not jacketed), and one 2BBL brite-tank w/ cooling coils (not jacketed). I have four inkbirds and the valves shown will be controlled by inkbirds at 110v.
Slide1 by Jeremy Boucher, on Flickr
Untitled by Jeremy Boucher, on Flickr
Untitled by Jeremy Boucher, on Flickr
Untitled by Jeremy Boucher, on Flickr
Comment