3D printing (maybe we can get a place specifically for 3D printing for the brewery)

[Brwd.By.Boucher]

So I have a number of things I have printed for the brewery over the last couple of months but yesterday was the smallest, however, "I needed" to print it. Somehow I lost the little white plastic piece in the keg coupler that holds the ball down. So I used another donor to take measurements and I was able to spend ten minutes designing and ten minutes to print. Once the brewery gets more organized and we get the office sorted, I will move the printer to the brewery.... The yellow one is my print.

Then below are the other prints I have done thus far, flight fins and tap handles using my logos character.

(https://flic.kr/p/2iL3BPF)Untitled (https://flic.kr/p/2iL3BPF) by Jeremy Boucher (https://www.flickr.com/photos/150411469@N04/), on Flickr

(https://flic.kr/p/2iL7YqB)Untitled (https://flic.kr/p/2iL7YqB) by Jeremy Boucher (https://www.flickr.com/photos/150411469@N04/), on Flickr

(https://flic.kr/p/2iL6meE)Untitled (https://flic.kr/p/2iL6meE) by Jeremy Boucher (https://www.flickr.com/photos/150411469@N04/), on Flickr

(https://flic.kr/p/2iL3zCS)Untitled (https://flic.kr/p/2iL3zCS) by Jeremy Boucher (https://www.flickr.com/photos/150411469@N04/), on Flickr

(https://flic.kr/p/2iL6mfw)Untitled (https://flic.kr/p/2iL6mfw) by Jeremy Boucher (https://www.flickr.com/photos/150411469@N04/), on Flickr (https://flic.kr/p/2iL8eYL)Untitled (https://flic.kr/p/2iL8eYL) by Jeremy Boucher (https://www.flickr.com/photos/150411469@N04/), on Flickr

(https://flic.kr/p/2iL8keR)Untitled (https://flic.kr/p/2iL8keR) by Jeremy Boucher (https://www.flickr.com/photos/150411469@N04/), on Flickr

(https://flic.kr/p/2iL8eYA)Untitled (https://flic.kr/p/2iL8eYA) by Jeremy Boucher (https://www.flickr.com/photos/150411469@N04/), on Flickr
***************

[banjo]

3D Printing

This is great information! Please share more with the community!