I'm in the process of getting my building set up for equipment and we are looking for an epoxy or paint to put on the floor over concrete. Does anyone have a brand name of something that can be used?
Announcement
Collapse
No announcement yet.
brewery floors
Collapse
X
-
There's lots of posts on floors if you search.
I am going with quarry tile sloped at 1/4" to the foot, as we are about to start construction. Other sources recommended by one of the big equipment manufacturers:
Steelcote
Topical floor coating, textured or non-textured
1 Steelcote Square
St. Louis, MO 63103
Telephone #: (314) 771-8053
Toll Free #: (800) 737-0282
· gripoxy
Quick setting, non-skid floor surface (glass reinforced with aluminum oxide)
Carboline Company
350 Hanley Industrial Court
St. Louis MO 63144
Telephone #: (314) 644-1000
· industrial epoxy
High performance floor finish, TPM #115 tapping
General Polymers
145 Caldwell Drive
Cincinnati, OH 45216
Telephone #: (513) 761-0011
Toll Free #: (800) 543-7694
· 6 inch quarry tile
Sanitary, decorative floor and wall surface
Available at local floor tile suppliers
· kefa paint
Floor finish for high traffic areas, developed by COORS
Beverage Consult International
Finn Knudson
4602 Plettner Lane; Suite 2E
Evergreen, CO 80439
Telephone #: (303) 674-2251Seth Gross
Head Burger Flipper & Beer Tester
Bull City Burger and Brewery
Durham, NC 27701
www.bullcityburgerandbrewery.com
-
thanks
Thanks. Im sure I missed them but I didn't see actual brand names that have worked for people in other posts. I have seen industrial epoxy and other paints out there, I just wanted to make sure they have worked for others in the past.
thanks again
Comment
Comment