Hey Guys,
We have a 8.5 barrel direct fired kettle that we are close to going into operation with. No matter who I talk to I cant seem to get a straight answer on what diameter pipe to vent the burners with and if it must be double wall, or some type of approved vent pipe. I was temped to just run 8 or 10 inch Type B Gas Vent but thought I would check here first.
Please advise? Peak burner BTU's is 450,000. Although when testing we never had to run anywhere near full throttle.
Thanks in advance for any thoughts or suggestions.
Cheers,
Chris
We have a 8.5 barrel direct fired kettle that we are close to going into operation with. No matter who I talk to I cant seem to get a straight answer on what diameter pipe to vent the burners with and if it must be double wall, or some type of approved vent pipe. I was temped to just run 8 or 10 inch Type B Gas Vent but thought I would check here first.
Please advise? Peak burner BTU's is 450,000. Although when testing we never had to run anywhere near full throttle.
Thanks in advance for any thoughts or suggestions.
Cheers,
Chris
Comment