Woohoo, beat to death thread right?
Well we are in the midst of trying to figure this all out. I am just reaching out to see if this would work. I would:
1.fill our Brite with 150-160deg water
2.add star-san
3.Line out to 1/2 pump-line out to Keg coupler
4. Let fill
5.open c02 value outlet let liquid run back into brite
6. rinse and repeat, 2nd rinse PBW
We just got our first shipment of kegs in and I really have never touched them besides corny's, I currently dont have 17l for a small keg washer. Ive seen the other DIY ideas but Im curious to see if this would work, or if anyone else has ran this in there nano stages.
Thanks Guys!
Well we are in the midst of trying to figure this all out. I am just reaching out to see if this would work. I would:
1.fill our Brite with 150-160deg water
2.add star-san
3.Line out to 1/2 pump-line out to Keg coupler
4. Let fill
5.open c02 value outlet let liquid run back into brite
6. rinse and repeat, 2nd rinse PBW
We just got our first shipment of kegs in and I really have never touched them besides corny's, I currently dont have 17l for a small keg washer. Ive seen the other DIY ideas but Im curious to see if this would work, or if anyone else has ran this in there nano stages.
Thanks Guys!
Comment