I would like to build my own Ice Bank resevoir to build up
excess cooling water during nighttime hours and am searching for
an answer to how many meters/ft of copper I will need to
attach and submerge into a 70/30 water/glycol solution. Resevoir
is 250gallons. My condensing unit is a 12HP Danfoss Dual Fan.
Should I braze the copper or solder at the joints. My goal is to
help slow down the glycol temp increase during the production day
brought on by the wort cooling in the brewhouse.
thanks in advance for any input
Lance Jergensen
9517411201
excess cooling water during nighttime hours and am searching for
an answer to how many meters/ft of copper I will need to
attach and submerge into a 70/30 water/glycol solution. Resevoir
is 250gallons. My condensing unit is a 12HP Danfoss Dual Fan.
Should I braze the copper or solder at the joints. My goal is to
help slow down the glycol temp increase during the production day
brought on by the wort cooling in the brewhouse.
thanks in advance for any input
Lance Jergensen
9517411201
Comment