Hello guys,
I have question here and any help will be appreciate.
I have a couple of PT100 type temperature sensors, (picture below), it has 4 pins to connect the wires but I dont have a schematic of how to wire it. There is marked ground wire on one pin and the numbers 1, 2,3 on another remain three, but I dont know which one I have to use.
Also I intend to use it with a STC type controller, from what I have searched, most STC`s have temperature sensor input for only two wires and what I have read on specifications it is for NTC type sensor.
My question is, can I use my sensor with a STC controller? How do I wire it?
Thanks
I have question here and any help will be appreciate.
I have a couple of PT100 type temperature sensors, (picture below), it has 4 pins to connect the wires but I dont have a schematic of how to wire it. There is marked ground wire on one pin and the numbers 1, 2,3 on another remain three, but I dont know which one I have to use.
Also I intend to use it with a STC type controller, from what I have searched, most STC`s have temperature sensor input for only two wires and what I have read on specifications it is for NTC type sensor.
My question is, can I use my sensor with a STC controller? How do I wire it?
Thanks
Comment