Just got an analysis of my water and am wondering if someone can provide basic assistance in treatment.
Ca 14.8 ppm
Hardness (as CaCO3) 49.8 ppm
Mg 3.14 ppm
Alkalinity Total (as CaCO3) 45 ppm
Cl 2.8 ppm
Na 3.12 ppm
In general, I'm looking at brewing ales and think I should be adding gypsum to up the calcium level but my knowledge on this subject is very basic. Is there anything else I should be looking at?
grs
Ca 14.8 ppm
Hardness (as CaCO3) 49.8 ppm
Mg 3.14 ppm
Alkalinity Total (as CaCO3) 45 ppm
Cl 2.8 ppm
Na 3.12 ppm
In general, I'm looking at brewing ales and think I should be adding gypsum to up the calcium level but my knowledge on this subject is very basic. Is there anything else I should be looking at?
grs
Comment