Gaskets - help

[fa50driver]

So, I received a custom made fermenter and instead of the 6 inch American "standard' sanitary fitting for a hop port and the bottom outlet of the tank, I received, what appears to be, either an Imperial 6inch (Sch 5), DIN 150 or an ISO 6 5/8" inch fitting

Problem is they also shorted me a couple gaskets so I either have to have some gaskets custom made or find a manufacturer that has these size gaskets.

I tried the regulars - brewery gaskets.com, GW Kent, GVC, St. Pats.

Anyone have any idea where to get gaskets this size? Many sites have DIN gaskets but they stop at DIN 100. I would like to get EPDM and Teflon.

Thx!

[revnatscider]

Try a hardware store or more specifically a plumbing warehouse. Plumbers use gasket sheets to cut their own size gaskets. Don't know about teflon vs EPDM, etc, but the guys behind the counter would know.

[liammckenna]

Try www.rubberfab.com domestically. They may be able to help you.

These guys can definitely help you: http://connectors.ch/EN/index.php but they're a little further away.

Pax.

Liam

[fa50driver]

Thx Liam,

I will try the Jersey folks first since they are pretty close.