Just put an offer on a space but realized that the specific conditions of the unit are going to be very different than I've worked with before. The rental unit is 4000 sq feet, with 26' tall ceilings, but surrounded by attached units on all sides except for the Front (Entrance and loading dock are in the front). This leaves me with no real ability to have the Glycol chiller outside, nor do I think it's overly feasible to get it onto the roof, not sure how much unnecessary heat I'll create keping both the cold room and the Fermenters cool. This setup also prevents me from creating a grain room with external ventilation, would there be any issue running a mill in the open here with a dust collector attached on?
Sorry about the quality of the sketchup, haven't brought this over to the Engineer/Architect yet, just trying to throw ideas down as I can think of them until someone with far more experience can pretty it up. In the sketch there would be another renter to the left, right, and behind the brewhouse. The building is completely bare right now, with only the Loading Door and Front door set in stone, any better ideas? Suggestions are greatly appreciated.
Sorry about the quality of the sketchup, haven't brought this over to the Engineer/Architect yet, just trying to throw ideas down as I can think of them until someone with far more experience can pretty it up. In the sketch there would be another renter to the left, right, and behind the brewhouse. The building is completely bare right now, with only the Loading Door and Front door set in stone, any better ideas? Suggestions are greatly appreciated.
Comment