I have been building a keg washer for my hope to be soon brewery and looking for some input on what kind of information/ functions would be useful.
Getting close has Caustic tank "adding heat control soon", Sanitizer tank, Air purge, And CO2 purge.
I have wash recipes for 1/6, 1/4, 1/2 barrel kegs and one for 50l kegs. plus RINSE ONLY and EMPTY FULL KEG don't know if they would be useful?
On the wash screen, you select the keg size "previous picture" START, STOP, and a pre-drain" for kegs that aren't quite empty will alow them to drain prior to washing"
The message display shows the current status of the keg washer "ready to run, caustic wash, air purge ......"
Wash time button from previous pic has all the times for all the recipes and changes based on what keg you have selected.
FIRST RINSE. Uses fresh water to wash and drains to floor.
AIR PURGE 1. Uses air to purge water to floor.
CAUSTIC. Washes with caustic and returns to caustic tank.
AIR PURGE 2 . Uses air to purge caustic to caustic tank.
RINSE 2 . Uses fresh water to rinse and drains to floor.
AIR PURGE 3. Uses air to pure water to floor.
SANITIZE. Uses sanitizer and returns to sanitizer tank.
CO2 PURGE. uses CO2 to purge back to sanitizer tank.
PRE DRAIN.The amount of time to drain to the floor prior to washing.
WASH COUNT. Number of wash cycles to complete be for notifying you to change fluid.
PUMP DELAY. The amount of time to delay the pump before pumping so no air enters pump. " I don't think this needs to be charged once set so will probably remove.
*I will be adding a CO2 fill cycle that will use a regulator to set the pressure.
let me know what you think, what are things that make sense to have and not to have?
Don't know if I should make less changeable time's to make it simpler? My wife thinks i should try selling these things "winch may be half the reason i wanted so many changeable times" that and i already bought a touch screen for it.
Getting close has Caustic tank "adding heat control soon", Sanitizer tank, Air purge, And CO2 purge.
I have wash recipes for 1/6, 1/4, 1/2 barrel kegs and one for 50l kegs. plus RINSE ONLY and EMPTY FULL KEG don't know if they would be useful?
On the wash screen, you select the keg size "previous picture" START, STOP, and a pre-drain" for kegs that aren't quite empty will alow them to drain prior to washing"
The message display shows the current status of the keg washer "ready to run, caustic wash, air purge ......"
Wash time button from previous pic has all the times for all the recipes and changes based on what keg you have selected.
FIRST RINSE. Uses fresh water to wash and drains to floor.
AIR PURGE 1. Uses air to purge water to floor.
CAUSTIC. Washes with caustic and returns to caustic tank.
AIR PURGE 2 . Uses air to purge caustic to caustic tank.
RINSE 2 . Uses fresh water to rinse and drains to floor.
AIR PURGE 3. Uses air to pure water to floor.
SANITIZE. Uses sanitizer and returns to sanitizer tank.
CO2 PURGE. uses CO2 to purge back to sanitizer tank.
PRE DRAIN.The amount of time to drain to the floor prior to washing.
WASH COUNT. Number of wash cycles to complete be for notifying you to change fluid.
PUMP DELAY. The amount of time to delay the pump before pumping so no air enters pump. " I don't think this needs to be charged once set so will probably remove.
*I will be adding a CO2 fill cycle that will use a regulator to set the pressure.
let me know what you think, what are things that make sense to have and not to have?
Don't know if I should make less changeable time's to make it simpler? My wife thinks i should try selling these things "winch may be half the reason i wanted so many changeable times" that and i already bought a touch screen for it.
Comment