Hi folks!
First time post, after a LOT of reading!
I've only used open fermenters before, will this work for an unfiltered dry hopped lager in a unitank?
Primary @10C
Let it free rise @75% attenuation
Dump yeast twice- harvest 2nd
Dry hop near FG through port.
Dump hops, ramp down temp and add head pressure for carbonation.
Lager under pressure for 2-ish weeks
Depressurise tank, add Biofine clear through sample port using a corny, rinse with beer and add that too, re-pressurise.
Dump biofiney beer then package directly from racking arm.
Does this sound feasible?
i would spund but dont want a volcano when i add dry pellets to it.
is lagering under pressure ok?
will biofine clear work on carbonated beer?
Thanks lads and lasses, most helpful place in the beery universe.
First time post, after a LOT of reading!
I've only used open fermenters before, will this work for an unfiltered dry hopped lager in a unitank?
Primary @10C
Let it free rise @75% attenuation
Dump yeast twice- harvest 2nd
Dry hop near FG through port.
Dump hops, ramp down temp and add head pressure for carbonation.
Lager under pressure for 2-ish weeks
Depressurise tank, add Biofine clear through sample port using a corny, rinse with beer and add that too, re-pressurise.
Dump biofiney beer then package directly from racking arm.
Does this sound feasible?
i would spund but dont want a volcano when i add dry pellets to it.
is lagering under pressure ok?
will biofine clear work on carbonated beer?
Thanks lads and lasses, most helpful place in the beery universe.
Comment