So I had 30 bbls in brite tank carbing for 24 hours. Beer is holding at 10 psi head pressure and 33 degrees. I noticed today that the site glass is has continuous bubbles, most small-some large bubbles. Every fitting is tight all around no loss of head pressure. Could I have some kind of leak. its a 4 yr old used tank I have used for a month and haven't noticed this on 2 previous beers. The site level has decreased from 29 bbls to 25 bbls topped with foam---the insulation couldn't hold 4 bbls of beer-could it? Thoughts? If its a pinhole leak how do I find it? if it was leaking this much wouldn't i see it on the floor somewhere? clueless....
thanks,
Scott
thanks,
Scott
Comment