sensors

[UnFermentable]

Are you looking for the actual sensor, or the sensor housing, or both as pictured? They don't always come together.

I agree it looks like an RTD. Possibly PT100. They are usually quite long, but can be cut to size.

I would suggest Grainger, McMaster Carr, Omega, Automation Direct, Pyromation, depending on what you have available in the DR. Watlow (as suggested) is a good choice too. You should be able to get a number of fittings for the housing to match your 1/2" npt, and a watertight cord fitting to ensure a good seal. I prefer a spring loaded fitting for the 1/2" NPT to Thermowell so the sensor touches the end of the well at all times. Thermal paste is also helpful in general.

[xFutballFanx]

While ours are longer, yours look just like our Watlow RTD sensors.

https://www.instrumart.com/products/...td#!docs-specs

[sdelara]

hello all!

i am wondering where can i find sensors like the ones in the picture the thread size is 1/2"

thanks cheerS